GT-66V

High Speed 3-Axis Machining Center
GT-66V
Feature

Optimal Machine Structure

  • Specially designed T shape machine structure features superior rigidity. The width of column is the same as the base. The table is independently installed on base, and fully supported through the entire stroke, assuring maximum accuracy and dependability. Long term accuracy at high speed machining is assured.

Lifetime Accuracy

  • All castings are stress relieved and seasoning treated for long term accuracy and long service life.

Three Axes Ball Screws

  • Roller type linear guideways on three axes feature higher feedrate, resist heavier loads, ensure superior dynamic accuracy and a long service life.
  • Cutting feed rate on on X, Y, Z-axis: 20m / min
  • Rapid feed rate on on X, Y, Z-axis: 30m / min
  • Positioning accuracy:0.006mm/Full Stroke.
  • Repeatability: ±0.002mm/Full Stroke.
  • Cutter balance should be calibrated to within G2.5
Specification
MODEL T15 S24 S36
Travel (X / Y / Z) 720 x 500 x 400 mm
Cutting Feedrate(X / Y / Z) 20 m/min
Rapid Feedrate (X / Y / Z) 30 m/min
Table Area 750 x 500 mm
Max. Spindle Speed 15,000 rpm 24,000 rpm 36,000 rpm
Spindle Type Direct Drive Built-in
Bearing Lubrication Grease Oil-Air
Spindle Cooling Oli-Cooling Water-Cooling
Spindle Tapper BT-40 /BBT-40 HSK-A63 HSK-E50
Magazine loading capacity 12 tools / 24 tools (OPT.)
  • Above specifications are based on Siemens controller, Heidenhain, Fanuc and Mitsubishi controllers are available.
  • All specifications, design and characteristics are subject to change without prior notice.
Accessories

Standard Accessories

  • Coolant tank
  • Work lamp
  • Toolbox
  • Coolant motor
  • Coolant system
  • Spindle air blow system
  • Chip air blow device
  • Air conditioner for electrical cabinet
  • MPG
  • M30 work end indication light
  • Spindle cooling system
  • Full enclosed splash guard
  • Central control lubricator
  • Operation and maintenance manual
  • Leveling bolts and pads
  • Network function
  • Spindle heat compensation system

Optional Accessories

  • Coolant through spindle
  • Three axes optical scales
  • Oil and lubricant spearator
  • Oil mist cooling system
  • Oil mist collector
  • Auto tooling measurement
  • Auto workpiece measurement
  • Scraper chip conveyor and cart
  • Graphite dust collector
  • Transformer
Back