GENTIGER MACHINERY INDUSTRIAL CO., LTD.-High-Speed Machine, Professional High-Speed Machine, Vertical Milling Machine, Milling Machine, High Speed 5-Axes Machining Center, High Speed Double Column Machining Center, Graphite Machining Center

Workpiece Examples:

Optimal Machine Structure

Specially designed T shape machine structure features superior rigidity. The width of column is the same as the base. The table is independently installed on the base and fully supported by 3 roller-type linear guideways through the entire stroke assuring maximum accuracy and dependability. Long term accuracy at high speed machining is assured.

Lifetime Accuracy

All castings are stress relieved and seasoning treated for long term accuracy and long service life.

Double Ball Screws & Three linear guideway for Y axis

Roller type linear guideways on three axes feature higher feedrate, resist heavier loads and ensure superior dynamic accuracy and a long service life. Y-axis is equipped with 3 linear guideways for superior rigidity.

Y axis is driven by double ballscrew system. Its strong power can reduce machining time for large molds and increase profitability.

3 axes feedrates: rapid feedrate 20m/min, cutting feedrate 20m/min.

Positioning accuracy : 0.004/300 MM (Equipped with optical scale)

Repeatability: ±0.003 MM (Equipped with optical scale)

Cutter balance should be calibrated to within G2.5

MODEL	T10	S15B
Max. spindle speed	10,000 rpm	15,000 rpm
Spindle taper	BT-50	HSK-A100
Spindle motor	22 kw	30/39 kw
Torque	140 Nm	150/195 Nm
Inner Dia, of spindle bearing	Ø90 mm	Ø100 mm
Bearing lubrication	Grease	Oil-Air
Spindle cooling	Oil-cooling	Water-cooling
Distance from spindle center to machine front	1460 mm
Table area	1740x 1040 mm
T-slot	22 / 160 x 7 mm
Height of table from ground	1100 mm
Max. load of table (Average load)	3000 kg
Travel for X, Y, Z axes	1600 x 1000 x 600 mm
Distance from table surface to spindle nose	300~900 mm
Rapid feedrate	20 m/min
Cutting feedrate	20 m/min
ATC tool system	BT-50	HSK-A100
Magazine capacity	20	16
Max. tool diameter	133 mm	133 mm
Max. tool length	300 mm	300 mm
Max. tool weight	15 kg	15 kg
Tool magazine motor	40 W
X, Y and Z axis servomotors	8.7 kw
Air pressure requirement	5-7 kgf / cm²
Air conditioner	3.2 Amp
Spindle cooler	5 Amp / 3HP	6 Amp / 3HP
Automatic lubricator (slideways)	150 W
Coolant motor	760 W
Chip flush motor	1600 W
Total power consumption (Max.)	56 KVA	50 KVA
Coolant tank	380 Liter
Packing dimensions (L x W x H)	4430 x 3360 x 4060 mm / 3640 x 1940 x 1700 mm
Net weight	24,500 kg
Gross weight	26,500 kg

TOP