Optimal Machine Structure

Specially designed T shape machine structure features superior rigidity. The width of column is the same as the base. The table is independently installed on base, and fully supported through the entire stroke, assuring maximum accuracy and dependability. Long term accuracy at high speed machining is assured.

Lifetime Accuracy

All castings are stress relieved and seasoning treated for long term accuracy and long service life.

Three Axes Ball Screws

Roller type linear guideways on three axes feature higher feedrate, resist heavier loads, ensure superior dynamic accuracy and a long service life.

High acceleration speed on 3 axes, X-axis 0.8G, Y-axis 0.9G, and Z-axis 1.0G. This outstanding design greatly reduces machining time while upgrading economical efficiency.

3 axes feedrate: rapid feedrate 30 m/min

Positioning accuracy: 0.003/300mm (Equipped with optical scale)

Repeatability: ±0.002MM (Equipped with optical scale)

Cutter balance should be calibrated to within G2.5


MODEL
T16P
Y24A
S36E
Max. spindle speeds
15,000 rpm
24,000 rpm
36,000 rpm
Spindle taper
BT-40
HSK-A63
HSK-E50
Spindle motor
11/14.7 kw
18/23 kw
20/24 kw
Inner Dia. of spindle bearing
Ø70 mm
Ø65 mm
Ø50 mm
Bearing lubrication
Grease
Oil-Air
Oil-Air
Spindle cooling
Oil-cooling
Water-cooling

Water-cooling

Distance from spindle center to machine front
750 mm
Table area
750 x 500 mm
T-slot
18 x 5 x 100 mm
Height of table from ground
800 mm
Max. load of table (Average load)
400 kg
Travel for X, Y, Z-axes
720 x 500 x 400mm
Distance from table surface to spindle nose
150~550 mm
Rapid feedrate
30 m/min
Cutting feedrate
20 m/min
Magazine capacity
16
Max. tool length
250 mm
Max. tool weight
5 kg
Motor of tool magazine
40 W
X, Y & Z axis servomotors
5.1kw (X) / 4.2kw (Y & Z)
Air pressure requirement
5-7 kgf/cm2
Air conditioner
3 Amp
Spindle cooler
7.2 Amp/3HP
Automatic lubricator (Slideways)
150 W
Coolant motor
0.5 HP
Total power consumption (Max.)
40 KVA
45 KVA
45 KVA
Coolant tank
250 liter
Packing dimensions (L x W x H)
3200 x 2140 x 2550 mm / 870 x 700 x 1560 mm
Net weight
6040 kg
Gross weight
6935 kg

Copyright © GENTIGER MACHINERY INDUSTRIAL CO., LTD. Hosted by Machinetools Directory , Plastic and Rubber Machine Directory.

TOP