Finishing Time:
Material: Aluminum
Tool: R5 ball nose cutter
 
Finishing Time:
Material: NAK80 (HRC40)
Tool: R4 ball nose cutter

 




GT-2516V

 Feature

Optimal Machine Structure
The model GT-2516V is a double column structure design for high speed machining. The table is independently installed on the base and fully supported by 3 roller-type linear guideways through the entire stroke, assuring maximum accuracy and dependability. The columns are one-piece constructed for extra high rigidity.
Lifetime Accuracy
All casting are stress relieved and seasoning treated for long term accuracy and long service life.
Three Axes Linear guide Ways
Roller type linear guide ways on three axes feature higher feedrate, resist heavier loads and ensure superior dynamic accuracy and a long service life. X-axis is equipped with 3 linear guide ways for superior rigidity.
Three axes are driven by powerful servo motors. Its strong power can reduce machining time for large molds and increase profitability.
Three axes feedrates :
Rapid feedrates 20/18/20 m/min.
Cutting feedrates 20/18/20 m/min.
Three axes are equipped with Heidenhain optical scales.
Positioning accuracy: 0.005mm/Full Stroke. (ISO-230-2).
Repeatability : < 0.004mm/Full Stroke. (ISO-230-2).
Cutter balance should be calibrated to within G2.5.

 Specification

MODEL T10 T15 S24A
Travel (X / Y / Z) 2500 x 1600 x 700 / 800 mm (Opt.)
Table Area 2800 x 1600 mm
Max. Spindle Speed (rpm) 10000 15000 24000
Type of Spindle Motor Direct Drive Direct Drive Built-in
Spindle Taper BT / BBT-50 BT / BBT-40 HSK-A63
ATC Capacity 20 tools / 40 tools (Opt.)

* SIEMENS control is standard. HEIDENHAIN, FANUC and MITSUBISHI control are optional.
* Various door height or Y axis 3 linear guideways of SRG65 is available for option.
* Above specifications are subject to change without prior notice.

 STANDARD ACCESSORIES

  • Coolant tank
  • Work lamp
  • Tool box
  • Coolant motor
  • Coolant system
  • Spindle air blow system
  • Chip air blow device
  • Air conditioner for electrical cabinet
  • MPG
  • M30 work end indication lamp
  • Spindle cooling system
  • Caterpillar chip conveyor and cart
  • Operation and maintenance manual
  • Leveling bolts and pads
  • Helix chip conveyors along side working table
  • Network function
  • X,Y,Z axis optical scale

 OPTIONAL ACCESSORIES

  • Oil and lubricant separator
  • Oil-mist cooling system
  • Auto tool measurement system
  • Auto workpiece measurement system
  • Coolant through spindle device